Tape measure
For measuring the room, the ceiling height, the distance from the table to the light and the height at which a wall light is comfortable. Write the measurements straight onto the plan so you do not have to measure again.
An independent magazine about home lighting. We do not sell light fittings or do electrical work; we are not connected with the former site on this domain and have nothing to do with gambling.
Tools
You do not need a workshop to plan your lighting. Most of the work is done with a tape measure, a pencil and a phone, and a stepladder comes in handy when it is time to change bulbs and wipe shades. Below is a short list of helpers, without model or brand names, with a note on why each one is needed.
The most useful tool for lighting is your own evening observations, written down in a notebook.
We list things by task and do not recommend specific models. Electrical tools are deliberately left out of the list: wiring work is done by an electrician with their own equipment.
Six simple helpers for planning and looking after your lighting.
For measuring the room, the ceiling height, the distance from the table to the light and the height at which a wall light is comfortable. Write the measurements straight onto the plan so you do not have to measure again.
Squared paper, a pencil and an eraser. On the plan, mark windows, doors, furniture, sockets and switches, and then the zones and future fittings. A paper plan is easy to show to an electrician.
Such apps give a rough idea of how bright different parts of the room are. They are not very accurate, but good enough to compare a table by the window with a corner by the door.
A sturdy stepladder with wide steps and a locking brace is needed for changing bulbs and wiping shades. A stool or a chair on wheels is not suitable for this.
A dry or slightly damp microfibre cloth removes dust from shades and lampshades without scratching. A soft brush is handy for a fabric lampshade.
A couple of evenings with a notebook will tell you more about your lighting than any tables: where it is dark, where there is glare, where a lamp is missing by the armchair. The notes will be useful when discussing the plan.
Information about lighting is given in general terms, based on the code of practice on natural and artificial lighting, lighting manufacturers’ instructions and the magazine’s editorial materials. The permitted lamp wattage, cap type and installation conditions for a particular fitting are set by its manufacturer: before changing a bulb, check the markings on the fitting and the instructions.