Planning
Planning the lighting in your flat
Lighting is easiest to think through in advance — before the walls are painted and the furniture is in place. Then the electrician can run circuits where they are needed, and you will not have to trail extension leads across the room. But a plan helps in a lived-in flat too: it shows what is missing and what can be improved without alterations.
A lighting plan is a sheet of paper, a pencil and an honest answer to the question of where you sit in the evening. Everything else adapts to that answer.
Below is a general planning sequence. It does not replace a design prepared by a professional and contains no norms in figures: in a flat, the main criterion is the comfort of the people who live there.
A step-by-step lighting plan
Describe life in each room
For each room, list what happens there: cooking, reading, working at the computer, children’s activities, watching films. This is the basis for everything that follows.
Draw a plan
Sketch the rooms from above and mark windows, doors, furniture, sockets and switches. The scale can be approximate; what matters is how things sit in relation to each other.
Mark the zones
Circle the places that need their own light: the worktop, the dining table, an armchair, the bed, and in the hallway the spot where you get dressed and the shelf for keys.
Share out the three layers
For each zone, decide how it will be lit: by general, task or accent light. A room usually has at least one source from each layer.
Choose the tint
Warm light is more often chosen for the bedroom and living room, neutral for the kitchen and workspace. Try to keep tints within one room from clashing with each other.
Think about controls
Decide where it is convenient to switch the lights on: by the door, by the bed, by the sofa. Mark which fittings are worth putting on a dimmer so you can change the brightness.
Discuss the plan with an electrician
If you need new circuits, switches or sockets, show the plan to an electrician. They will assess what is possible in your home and do the work safely.
What to consider when planning
- Colour rendering: under a bulb with good colour rendering, food, fabrics and wall paint look natural.
- Daylight: see which way the windows face and at what time of day the room is flooded with sun.
- Curtains: heavy ones help darken the bedroom, light ones diffuse bright sun in the living room.
- Wall colour: pale surfaces reflect light, dark ones absorb it, and you will need more lamps.
- Damp zones: in the bathroom and near the sink you need fittings with moisture protection stated by the manufacturer.
- Room for the future: leave the option of adding a lamp if the room changes its purpose over time.
Dimmers and scenes
A dimmer lets you change brightness smoothly: during the day the light can be turned up for cleaning, in the evening turned down for relaxing. Not every bulb works with a dimmer, so check compatibility on the packaging and in the instructions.
A scene is a combination of lights switched on that you have thought out in advance. For example, “dinner”: dimmed general light and the pendant over the table; “cinema”: only the shelf lighting and the floor lamp. You can create scenes without complicated technology, simply by putting fittings on different switches.
Installing a dimmer and moving switches is done by an electrician. Your job is to decide in advance which scenes you need and show them on the plan.
Read also
- Ideas
Lighting ideas for the living room, kitchen, bedroom, children’s room, hallway and balcony — no brands, just clear reasoning.
- Tools
What helps when planning lighting: a tape measure, a paper plan, a light meter app on your phone, a stepladder.
- Guides
How to match a bulb to a fitting, how to judge your lighting in the evening and when you need an electrician.
Sources
- SP 52.13330.2016 “Natural and Artificial Lighting”
- Lighting manufacturers’ instructions (in general terms)
- The magazine’s editorial materials
Information about lighting is given in general terms, based on the code of practice on natural and artificial lighting, lighting manufacturers’ instructions and the magazine’s editorial materials. The permitted lamp wattage, cap type and installation conditions for a particular fitting are set by its manufacturer: before changing a bulb, check the markings on the fitting and the instructions.